#TUTORIAL# Tomtom 7 for PNA with WINCE 4.2

[demonfatal]

Ok guys I have finished my tutorial.

If you have problem for install tomtom 7 on WINCE 4.2 device look that :
[Only Registered Users Can See Links]
Password : demonfatal

Enjoy...;)

PS : Thanks to "manjiman" for english corrections.:cool:

[tangbohu]

Great job! Thanks.

Ok guys I have finished my tutorial.

If you have problem for install tomtom 7 on WINCE 4.2 device look that :
[Only Registered Users Can See Links]
Enjoy...;)

PS : Thanks to "farzeenmanji" for english corrections.:cool:

[kikker]

Hey great tutorial! Would you know how to do this for a WinCE 5.0 device, or do you know of a tutorial somewhere? Thanks....

[arhum]

Ok guys I have finished my tutorial.

If you have problem for install tomtom 7 on WINCE 4.2 device look that :
[Only Registered Users Can See Links]
Enjoy...;)

PS : Thanks to "farzeenmanji" for english corrections.:cool:

Hi Demonfatal i am having problems still at particular point while following your tuturiol may be you could help

when i reach the step with ttnbot exe, to create a planned route, after choosing the destination with letter a it goes to calculating route screen but instead of calculating it say waiting for gps signal and stays like that. it does not say it in english but thats what i presume it is saying.

since i cant develop a route map settings file doesnot work and i get not enugh memory

please help my mind is freezing and hanging by now

[demonfatal]

Hi Demonfatal i am having problems still at particular point while following your tuturiol may be you could help

when i reach the step with ttnbot exe, to create a planned route, after choosing the destination with letter a it goes to calculating route screen but instead of calculating it say waiting for gps signal and stays like that. it does not say it in english but thats what i presume it is saying.

since i cant develop a route map settings file doesnot work and i get not enugh memory

please help my mind is freezing and hanging by now

I you fix the gps with the first release (with ttnbot.exe) you get an error message : "not enough memory...."
But you don't need to fix gps for generate a planned route, look my tutorial and you can choosing a destination with an other letter...
Send me a private message if you have problem again...;)

[pepxl]

Hi Demonfatal i am having problems still at particular point while following your tuturiol may be you could help

when i reach the step with ttnbot exe, to create a planned route, after choosing the destination with letter a it goes to calculating route screen but instead of calculating it say waiting for gps signal and stays like that. it does not say it in english but thats what i presume it is saying.

since i cant develop a route map settings file doesnot work and i get not enugh memory

please help my mind is freezing and hanging by now

You do not have to select Navigate
To to make a route simply scroll to the second page and select A to B route plan its the first top left icon this will calculate route's with out the need for a gps signal. This way you can then select view route and demo to get a nice little demo of any route before taking it lol

[arhum]

I you fix the gps with the first release (with ttnbot.exe) you get an error message : "not enough memory...."
But you don't need to fix gps for generate a planned route, look my tutorial and you can choosing a destination with an other letter...
Send me a private message if you have problem again...;)

You do not have to select Navigate
To to make a route simply scroll to the second page and select A to B route plan its the first top left icon this will calculate route's with out the need for a gps signal. This way you can then select view route and demo to get a nice little demo of any route before taking it lol

thanks Guys for the help it seems to work until now see how it works

i much appreciate for the help

cheers

[mitchon]

Hello Demonfatal;
Thanks for your tuto and sharing your exprience with us.
If I understand the method: we use TT7Bot to create a valid MapSettings.cfg , then
we use a wrapper around tomtom7 in a script that copy/save this valid file.

So why we do not simply keep using TT7Bot ?
TT7Bot will not work for the normal usage ?
merci !

[demonfatal]

Hello Demonfatal;
Thanks for your tuto and sharing your exprience with us.
If I understand the method: we use TT7Bot to create a valid MapSettings.cfg , then
we use a wrapper around tomtom7 in a script that copy/save this valid file.

So why we do not simply keep using TT7Bot ?
TT7Bot will not work for the normal usage ?
merci !

No because the first release with TT7Bot in "navigator" directory CRASH if you fix sattelites !
With my second release :
"TT7.WCE.4.2" directory > tomtom 7 works fine if you have generate a "MapSettings.cfg" file with the first release...;)

[arhum]

Ok guys I have finished my tutorial.

If you have problem for install tomtom 7 on WINCE 4.2 device look that :
[Only Registered Users Can See Links]
Enjoy...;)

PS : Thanks to "farzeenmanji" for english corrections.:cool:

hi demonfatal if i want to use v8 maps with tt7,which i installed through your tutorial, can i activate with the cmd prompt you included with option 1 which it says for v8


cheers

[demonfatal]

TUTORIAL updated link :

[Only Registered Users Can See Links]
Password : demonfatal

[jassz]

I have ORION-NV355 runing on microsoft windows CE.NET Version 4.20 (Build 1088) procesor SAMSUNG, ARM-A
I follow your tutorial but in step 6 when it shoul activate the map it wont doit it comes with some message on franch belive saying that map is not activated.
I trayd so meny diferent way but no suces, it start but no map, or it starts and then come message no enough memory or it sstarts with gunam map bat dont have activation code :)

what am I doing wrong?

[demonfatal]

I have ORION-NV355 runing on microsoft windows CE.NET Version 4.20 (Build 1088) procesor SAMSUNG, ARM-A
I follow your tutorial but in step 6 when it shoul activate the map it wont doit it comes with some message on franch belive saying that map is not activated.
I trayd so meny diferent way but no suces, it start but no map, or it starts and then come message no enough memory or it sstarts with gunam map bat dont have activation code :)

what am I doing wrong?

Follow all steps in tutorial...
Then send me a PM if don't works...;)
Good luck !

[demonfatal]

TUTORIAL updated link :

[Only Registered Users Can See Links]
Password : demonfatal

Enjoy...;)

[lg8088]

TUTORIAL updated link :

[Only Registered Users Can See Links]
Password : demonfatal

Enjoy...;)

hi demonfatal,

thanks for the tutorial. however the links on your website don't seem to work. they said "The uploader has removed this file from the server". Could you kindly check them please?

many thanks!

[demonfatal]

hi demonfatal,

thanks for the tutorial. however the links on your website don't seem to work. they said "The uploader has removed this file from the server". Could you kindly check them please?

many thanks!

All links are updated ! Try again...;)

[marcveraart]

hi demonfatal if i want to use v8 maps with tt7,which i installed through your tutorial, can i activate with the cmd prompt you included with option 1 which it says for v8


cheers

thanx for all:cool:

[lg8088]

All links are updated ! Try again...;)

Thanks again demonfatal!!!

[Zitar Roden]

Hi Demonfatal,

Finally a good tutorial.
I have a Mio c510e and tried to put tomtom 7 on it.
Every step works fine, but then it will not start up like the last step.

Where did I go wrong?

[demonfatal]

Hi Demonfatal,

Finally a good tutorial.
I have a Mio c510e and tried to put tomtom 7 on it.
Every step works fine, but then it will not start up like the last step.

Where did I go wrong?

I think you have an error on step 32 !
Look all path in this file and put your own path directory...;)

[Zitar Roden]

Thanks DemonFatal,

Its working.....
After the wrong input in the script, the delete action was fired... so no cfg-file.
After putting back the cfg-file and updating the script it works.

[nutcr0cker]

Hi Demonfatal. Thank you for th4e awesome tutorial. I followed your guide however. if I run the tt7navigator located in the ce 4.2 folder. It crashes. But if I put back the navigator folder and run the tomtom navigator from there it seems to work for a little time. I am using MIO 310x

[school]

Huge thanks to demonfatal

got this working on my lidl/silvercrest/typhoon myguide 4200 and its working perfectly, no problems what so ever.

only slight issue is that it doesnt save my home location and always has a route set when i turn it on,

i might save a backup of the SD card and try another install but this time might configure the stuff before i do the 3rd or 4th procedure.

thanks again

[school]

heres a update :

i did try another install and changed a few settings like the lauguage and the home location but it refused to start with a memory error.

i tried again but this time only with the home location and it is fine. got my home location set :)

now ive noticed it doesnt store the favourite locations, might try it again but with the three/four fav's i have and see..

so after you finish setting a advance route set your home location if you can and your fav's. somtimes it crashes but i just delete the map...cfg file in the map's folder and try again.

hope this helps


thanks again

[school]

just put two POI's and its worked, ive got my HOME Location and two far POI's sorted, extremly pleased

huge thank you again

[nutcr0cker]

Hi Demon fatal finally managed to run it on my MIO 310x following the directions Works good thus far. The problem was the 725.1803 map but it works perfectly with the 725.1905 map. Thanks. Also a note tt7 navigator.exe might crash 2-3 times initially but after that it works so don't give up

[Silky]

Hi Demonfatal

I have a Chinese 7" screen PNA in my car running WINCE 4.2. When you enter GPS mode you can navigate to the .exe file to tell the system to load the software when it then defaults to.

I have followed your tutorial and at step 15 ("TTN7BOT.EXE") the TomTom logo shows but the PNA crashes with 'unable to load - insufficient memory'. The PNA seems to fix satellites when the unit is switched on and I can't disable that function. I have tried UK and Western Europe maps.

I can get IGO and MIOMap to work but really I want TomTom.

Do you have any ideas please? Many thanks for your efforts.

Silky

[demonfatal]

Hi Demonfatal

I have a Chinese 7" screen PNA in my car running WINCE 4.2. When you enter GPS mode you can navigate to the .exe file to tell the system to load the software when it then defaults to.

I have followed your tutorial and at step 15 ("TTN7BOT.EXE") the TomTom logo shows but the PNA crashes with 'unable to load - insufficient memory'. The PNA seems to fix satellites when the unit is switched on and I can't disable that function. I have tried UK and Western Europe maps.

I can get IGO and MIOMap to work but really I want TomTom.

Do you have any ideas please? Many thanks for your efforts.

Silky

Ask to an other person the working file: mapsetting.cfg for your map then use the end of my tutorial...
Good luck...;)

[Silky]

Ask to an other person the working file: mapsetting.cfg for your map then use the end of my tutorial...
Good luck...;)

I'll give it a try - many thanks again.

Silky

[booboomc21]

TUTORIAL updated link :

[Only Registered Users Can See Links]
Password : demonfatal

Enjoy...;)

Demonfatal all your help is very well appreciated. I have one question for you. File n1 im assuming is the tomtom program but its in a different language i think french. is that right? if so how can i change it to english?

Thanks

[booboomc21]

Also im using your tut to put TOMTOM on a Becker 7934. Just so you know.

[demonfatal]

Demonfatal all your help is very well appreciated. I have one question for you. File n1 im assuming is the tomtom program but its in a different language i think french. is that right? if so how can i change it to english?

Thanks

It's not in french ^^
For change language:
> Go to menu
> Settings (middle down)
> Language (menu 6 of 6 > flags...) ;)

[booboomc21]

When i click on the "TTN7BOT.EXE" file it says "cannot find 'iexplore' ( or one of its components)

Like i sais im installing it on a Becker 7934 Win CE 4.2. Am i missing something?

Thanks. your a genius in this field.

[demonfatal]

When i click on the "TTN7BOT.EXE" file it says "cannot find 'iexplore' ( or one of its components)

Like i sais im installing it on a Becker 7934 Win CE 4.2. Am i missing something?

Thanks. your a genius in this field.

Try to run "TomTom Navigator.exe" ;)

[booboomc21]

I tried that but i still get the same error. Any other ideas?

Thanks for you expertise!

[demonfatal]

I tried that but i still get the same error. Any other ideas?

Thanks for you expertise!

Strange ! Where have you installed the tomtom directory ?
SDCARD ?

[booboomc21]

Yes SD card. Should i delete the navigator file and do it again? i dont see why that would work but i can give it a try.

[school]

after running tom tom for a little while i get a debug screen come up on top of the tom tom running. this happens every time i run the program from sratch.

i have to select file and exit/close to close the program.

anyway to stop this. i think the script isnt exiting and running in the backround.

thanks

[squidbilly]

Does anybody have a working copy of 'mapsetting.cfg'? I am getting the insufficient memory error. Thanks in advance.

[demonfatal]

Does anybody have a working copy of 'mapsetting.cfg'? I am getting the insufficient memory error. Thanks in advance.

for what map ??

[squidbilly]

for what map ??

North America 725.1906
I copied the MapSettings.cfg from a Mio c320 per the instructions in your tutorial demonfatal. TomTom then works well up until I select the voice (except for the time jumping around strangely). After selecting the voice, it crashes. Subsequent attempts to restart will not even display the TT7 splash screen. If I remove and then recopy the 'TT7.WCE.4.2' directory, then I can perform the setup again but it still crashes after I select the voice. I noticed that after the crash, there is no MapSettings.cfg in the map directory.

Oh yeah, this is on an Invion 4v506.

[demonfatal]

North America 725.1906
I copied the MapSettings.cfg from a Mio c320 per the instructions in your tutorial demonfatal. TomTom then works well up until I select the voice (except for the time jumping around strangely). After selecting the voice, it crashes. Subsequent attempts to restart will not even display the TT7 splash screen. If I remove and then recopy the 'TT7.WCE.4.2' directory, then I can perform the setup again but it still crashes after I select the voice. I noticed that after the crash, there is no MapSettings.cfg in the map directory.

Oh yeah, this is on an Invion 4v506.

Delete all and try again...with my tutorial...;)
Good luck...

[telukgong]

DemonFatal,
I have Chinese DVD Navigation, so I followed your tutorials until the end, then I run tt7navigator.exe, it pops up Tomtom logo then it ends up with not enough memory. It loaded with USA map. Any input will be appreciated. Thank you very much!

[thebossturk]

tank you very much for the tutorial:cool:

[school]

Delete all and try again...with my tutorial...;)
Good luck...

hey demonfatal

any tips for my problem regarding the debug screen

thank you in advance

[ck32]

Pour moi aussi je bloque a l'

EDIT: Please speak in english in the forum please!!
Or send me a PM in french if you want but without accent on word!!!

[ck32]

Sorry for my first reply but this forum do not accept accent...

I have also the same problems to go forward, after the step 15. My soft crashes with this message "not enought memory". I ve tryed, as noticed on some posts, to full my SD card till 4 Mo left,, but always the same message "Unable to start, Not enough memory is available".
Does anybody has found a working solution for this problem.
thanks
ck

[demonfatal]

The tutorial works fine !!!
You need just follow the tutorial step by step....slowly...;)
> If you want help in french send me a PM (private message)

[denseye]

hi demonfatal

for me 7.950 works OK

but I noticed that favorites and Home location are not stored :-(
I create a new fav, I exit (with exit in TT menu, or button af my GPS)
And when I re-launch TT7, fav is gone ...

Have you that pb ?...

Am I doing something wrong

Also, it's annoying that each time TT starts, it re-calculate the prepared route used to generate good mapsetting ...

[demonfatal]

If you don't use the file "mapsettings.cfg" in "mapsettings" folder Tomtom don't works...
For change the file just create a new trip in tomtom then close it and copy the file "mapsettings.cfg" in your map folder then paste the file into "mapsettings" folder and replace the file...;)

[denseye]

If you don't use the file "mapsettings.cfg" in "mapsettings" folder Tomtom don't works...
For change the file just create a new trip in tomtom then close it and copy the file "mapsettings.cfg" in your map folder then paste the file into "mapsettings" folder and replace the file...;)

And for the problem of non stored favorites ?... do you have an idea ?...

[demonfatal]

No solution!!!!
the only one it's this one:
Create a trip, new favorite...etc...
Next use that:
If you don't use the file "mapsettings.cfg" in "mapsettings" folder Tomtom don't works...
For change the file just create a new trip in tomtom then close it and copy the file "mapsettings.cfg" in your map folder then paste the file into "mapsettings" folder and replace the file...;)

[denseye]

OK : I unsterstand it's not possible to keep stored favorites

But can you explain why ?... Are they stored in the mapsettings file ?...

[demonfatal]

Because you need the script for use tomtom on your device
> The script copy the file "mapsettings.cfg" in "mapsettings" folder each time you run tomtom
And the last file "mapsettings.cfg" in your map folder is replaced by this one...;)

[skkrable]

hi!
Why [Only Registered Users Can See Links] is down?
i need the files...

[demonfatal]

Ok thanks!!!
Use [Only Registered Users Can See Links] for the moment!!! ;)

[burninhell2727]

Ok thanks!!!
Use [Only Registered Users Can See Links] for the moment!!! ;)

I have followed the tutorial using the files mentioned above however my ttnavigator.bif file returns the following

DeviceSerialNumber=
DeviceUniqueID=**********

i'm trying this on a pioneer AVIC-S2. All help is greatly appreciated.

[BenB]

Thanks for all your efforts Demonfatal, it's great that you're going to the effort of putting all this info out there!

I'm installing this on an old random SatNav (Evsham Nav-Cam 7000) that started having a lot of errors, and no longer even runs it's own software!

It runs Windows CE .NET 4.2 so It should be OK.

So I was about to stick it in the bin and figured I'd give TomTom a go first!

I followed your guide, couldn't get file 2 to work for some reason. TTN7BOT.exe said it wasn't a valid application.
Then I ran 'Tom Tom Navigator' which booted fine and asked me to register the maps. I had to use a different keygen, but that worked too) So it it does appear to be registered, and should be OK.

Problem is, it crashes every time it starts, saying 'not enough memory'.

I've gone to the control panel of the device and allocated all possible memory to running programs.

Then I tried putting the program onto the device instead of the SD card.

I tried changing the registry to boot straight into TomTom rather than into Windows explorer. But the same happened.

Is it really out of memory? Or is there another error?

(I'm using maps 6.75)

[demonfatal]

@burninhell2727
I think you must update your rom!!
Just look the last post of this thread:
[Only Registered Users Can See Links]
You must before update the rom make a full backup of your device!
> Flash disk,SDCARD......;)

@BenB
Ok delete all and try again with my tutorial!
> Just extract these .dll file into the folder "navigator"....
[Only Registered Users Can See Links] ;)

[GinoDivx]

Sorry for possibly duplicate question, I have Mio Moov, I can run IGo8 just fine, but TomTom doesn't run, even with latest DLL's. Can someone with Mio Moov create a snapshot of their TomTom SD card directory (without maps), and post it, so I can maybe get it going this way?

[BenB]

@BenB
Ok delete all and try again with my tutorial!
> Just extract these .dll file into the folder "navigator"....
[Only Registered Users Can See Links] ;)

Copied the DLLs on to the SD, now it won't even run the TomTom Navigator file! Says's it's not a valid Windows CE application! It worked yesterday!

[demonfatal]

Ok delete all new .dll file if tomtom7 worked yesturday...

[BenB]

Sorry, no it didn't work yesterday, it started to boot, but then said 'not enough memory'. I should have typed that clearer!

With all the new DLLs in the folder it won't even begin to load.

[demonfatal]

Try to add new .dll file one by one and test everytime...;)

[plutino]

Thanks for the tutorial. I don't know if this is new or not, but I get it to work on my Pharos 150 PNA using only file 1 at [Only Registered Users Can See Links] (navigator). I used a 7.75 map cracked with the keygen at the same website. But I did have used an older version of TTN on the same unit before, which I have to remove in order to make space for the new NA maps. I didn't copy the Mapsettings and didn't use the files in WCE.4.2.

[demonfatal]

lol...You must use the full tutorial man!
Because now with your (navigator) tomtom version just fix satellites and wait 1 minut...
What do you get ???

[plutino]

I have no idea. I probably didn't try it for that long and now wife took away the unit for a few days. But I was able to get a fix for the current location and route to somewhere else. What would happen? I hope she didn't get lost on her way back.

lol...You must use the full tutoral man!
Because now with your (navigator) tomtom version just fix satellites and wait 1 minut...
What do you get ???

[demonfatal]

Because With that if you fix the satellite and wait one minut you get: Unable to start. Not enough memory is available....
Try and say me ;)
> You must follow the full tutorial...

[plutino]

okay, will do the whole thing this weekend.

Because With that if you fix the satellite and wait one minut you get: Unable to start. Not enough memory is available....
Try and say me ;)
> You must follow the full tutorial...

[StormyKnight]

I have Mio Moov, I can run IGo8 just fine, but TomTom doesn't run, even with latest DLL's.

I have TT V7.910.9185 Au Map 815.2059 running on my Mio Moov 300, the issue with TT not running was I was using MioPocket & the softkb.dll provided with that was stopping it from running. If you have such a file just rename it & try again...

Cheers

[Boarder]

Hi demonfatal. Thank you for this outstanding tutorial.

I have a WinCE 4.2 device (Shinelco GPS3400 based on the Central Pacific GP-75). I followed your tutorial but I get stuck right at the beginning. When I try to run TTN7BOT.exe I get the error " 'TTN7BOT' is not a valid Windows CE application.". I think this means that the file is not compiled for my Samsung ARM processor but I find that strange since I can run the "TomTom Navigator.exe" file. However, and here is my actual problem, when I run this file TomTom freezes at the startup / splashscreen. Nothing else happens. Do you have any idea why this happens? It happens whether or not I have maps present in the root of the storage card (I used Iberia Iberia_815_2023 maps which I think are compatible by the way).

Thanks in advance!

[demonfatal]

Try to look this thead:
[Only Registered Users Can See Links] ;)

[BamBam0099]

Really appreciate your efforts but I can't get it to work so I have a couple questions.

What is the directory structure naming convention supposed to be? I am using the North America and Canadian maps so right now, my structure looks like

Storage Card
TomTom
navigator USA_and_Canada_v815.2022


I did everything in the tutorial but when I run TTN7BOT.EXE, the display is non-english so I have no clue what it says. The first screen says

Geen kaarten gevonden!

with a single button on the right side that says Volgende

How do I change it to English and what am I doing wrong?

Thanks again for all your hard work...

(installing on a Mio c310x)

[demonfatal]

Just look that for change the language:
[Only Registered Users Can See Links]*&p_li=&p_topview=1 ;)

[BamBam0099]

Just look that for change the language:
[Only Registered Users Can See Links]*&p_li=&p_topview=1 ;)

Ok, I redid the entire process. When I get to step 15, the program runs but then I see a screen that has Kies een kaart: in the top left hand corner and 2 entries that say USA and Canada

I am using the USA and Canada map but I only have one on the card so I have no idea why it lists it twice.

At the bottom are 2 buttons, the one on the left says Voucher and the one on the right says OK. When I press OK, it crashes. When I press Voucher, it says

Activering mislukt
Dit is helaas niet de juiste activeringscode voor het product 'USA_and_Canada'

with a button labeled Doorgaan


Man am I stumped now!

[demonfatal]

How do you use the keygen ??

[Boarder]

Try to look this thead:
[Only Registered Users Can See Links] ;)

Thanks for the link, demonfatal. I already tried that method before, but with no luck. Also, it is for another GPS Model (GPS3500 instead of GPS3400) which already has WinCE 5.

Is TomTom supposed to start (pass the splashscreen) when no maps are present in the SD card, i.e. when only the "navigator" folder is present?

[BamBam0099]

How do you use the keygen ??

First off, I want to thank you for taking the time to respond. I really appreciate it.

I find your tutorial very well written, clear and very easy to follow. I think that is what is frustrating me most! It looks so easy!


I used Babel Fish to translate the screen/buttons and 'geen kaarten gevonden' translates to 'no cards found'. I really don't understand what that means since it has to be able to find the card if it can run TTN7BOT.EXE.

As far as using the keygen, I did exactly what is specified in the TOMTOM 7 on PNA with WINCE 4.20 (my device is a Mio c310x)

When using the keygen, I selected 1 then 1 and that failed twice so I tried 2 then 1 and that failed too.

I just can't get past step 15

Thanks again

[BamBam0099]

I did the process twice again (starting fresh each time) and after each run of TTN7BOT.EXE, a file named ttnavigator.bif appears in the Storage Card root area which appears to be a duplicate copy of ttnavigator.bif which exists in the navigator folder.

[BamBam0099]

Yes, the file created, ttnavigator.bif, is an exact duplicate.

[TomTom NAVIGATOR]
DeviceName=MITAC, MIO DIGIWALKER
DeviceVersionHW=Windows CE 4.20
DeviceSerialNumber=<I blanked this out on purpose>
DeviceUniqueID=AAAZW82JAA
ApplicationVersion=7450
ApplicationBuildNumber=9030
UserName=
UserPassword=
CurrentColorSchemeBuiltIn=0
CurrentVoiceInfo=Tim
Features=PlusDownloadDynamic,PlusDownloadGeneral,PlusDownloadMap,PlusDownloadPOI,PlusDownloadScheme,PlusDownloadUpgrade,PlusDownloadVoice,PlusDownloadRingTone,PlusMessageNotification,PlusPushChannel,PlusTraffic,PlusWeather,PlusBuddies,PlusMobileSafetyCameras,PlusRoadConditions,PlusFixedSafetyCameras,PlusOnlineCamera,Newyork,Itinerary,Caymann,Durham,Handsfree,PhoneFeatures,CarSymbol,SDSlot,Keyboard,SupportKeyControl
SupportedPatchTypes=1f
NrSupportedErrorTypes=132
UserPatchDatVersion=102
CompressedPatchVersion=150
MapServerPatchDatVersion=104
DeletedPoiDatVersion=200
ServerLineIndexDatVersion=102
ServerNameIndexDatVersion=102

[demonfatal]

Heve you the file "note_prj.dll" in the navigator folder ???
Where have you put your map folder ? In sdcard root ?

[Boarder]

Heve you the file "note_prj.dll" in the navigator folder ???
Where have you put your map folder ? In sdcard root ?

If you're referring to me, then yes. I simply copied the whole folder "navigator" from the files of your tutorial. So, the note_prj.dll file is present.

The map is in the SD root, yes. It's Iberia_815_2023 taken from here [Only Registered Users Can See Links] (It says at the top that the 815.2023 maps are compatible with TomTom 7.4x and 7.9x).

Any other idea? Also, as I asked before, is TomTom even supposed to start (pass the Splash screen) if I place only the "navigator" folder in the SD root but without any map?

[demonfatal]

If you're referring to me, then yes. I simply copied the whole folder "navigator" from the files of your tutorial. So, the note_prj.dll file is present.

The map is in the SD root, yes. It's Iberia_815_2023 taken from here [Only Registered Users Can See Links] (It says at the top that the 815.2023 maps are compatible with TomTom 7.4x and 7.9x).

Any other idea? Also, as I asked before, is TomTom even supposed to start (pass the Splash screen) if I place only the "navigator" folder in the SD root but without any map?

Yes tomtom must start without map but you need a map for access to the menu!
If tomtom don't find your map try this:
Look the registry of your device with the tool in attachment.
Then change that:
'HKEY_LOCAL_MACHINE\Explorer\Shell Folders\' --> "My Document"
To
'HKEY_LOCAL_MACHINE\Explorer\Shell Folders\' --> "Storage Card"
And try again...;)

[Boarder]

I tried that and it didn't work either. If anyone has a clone of my Shinelco GPS3400 such as Amstrad GP1000, CarTrek 400, JustGo GP75 or Galatea Supratech and made TomTom 7 work on it, let me know.

For now I will try out iGO 8 which works on my device. Thanks demonfatal for your help!

[ALANNGUYEN28]

[Only Registered Users Can See Links]

contact me and i'll email you mapsettings cfg. for this map

[gdkalyanapu]

Ok guys I have finished my tutorial.

If you have problem for install tomtom 7 on WINCE 4.2 device look that :
[Only Registered Users Can See Links]
Password : demonfatal

Enjoy...;)

PS : Thanks to "manjiman" for english corrections.:cool:

Hey Demonfatal!
I have been waiting ages to load iGO8 in Harman Kardon GPS 300 and have been failing consistantly. I have even broke this device and i am getting the same device as a replacement. COuld you please provide a guided tutorial and links to the software and North American maps? Thanks in advance.

[meristar]

Thanks for sharing

[demonfatal]

@gdkalyanapu
For that ask in the IGO forum...;)

[mc_harley]

Thanx Demonfatal

mcharley

[Zhukov]

Because you need the script for use tomtom on your device
> The script copy the file "mapsettings.cfg" in "mapsettings" folder each time you run tomtom
And the last file "mapsettings.cfg" in your map folder is replaced by this one...;)

I hope I'm not bringing destruction to the world, but I can run TomTom without using the script...

And yes, I've used your instructions! =)

Demonfatal, a million thanks by the way!

(And care to explain why it works in my device? Its a Blaupunkt Lucca 3.3 CC).

Best regards!

[fyrusher]

Hi Guys

I have myguide V7 1000 Wince 4.2 (Build 1088), it has problem getting the DeviceUniqueID=******. I did run the TTN7BOT.exe on my PNA. and TomTom logo screen pops up. I have no idea to do the soft-reset,once the Totom logo on it. Beside i did a hard reset. After i put SD card back on the PC, there is nothing in ttnavigator.bif. could someone point me out any other ways to get my DeviceUniqueID=?

[gobi2000]

I have a Medion 96092 can not find a file winceimg for the gps does not work than blue screen uboot

[hardy32]

hi demonfatal

for me 7.950 works OK

but I noticed that favorites and Home location are not stored :-(
I create a new fav, I exit (with exit in TT menu, or button af my GPS)
And when I re-launch TT7, fav is gone ...

Have you that pb ?...

Am I doing something wrong

Also, it's annoying that each time TT starts, it re-calculate the prepared route used to generate good mapsetting ...



Hi everybody,

I found a solution for the problem with storing the favorites in the the MapSettings.cfg file. When you delete the entries in the TT7 Navigator.mscr that it looks like this:

Errorlevel ("off")

RunWait ("\Storage Card\TT7.WCE.4.2\TomTom Navigator.exe")

Exit

Now you work directly with the MapSettings.cfg file and you don't have to copy and move it after a change.

@ Demonfatal, why do you have a delete and xcopy command in the TT7 Navigator.mscr file?

Kind regards
Hardy32

[DyerMaker]

Hello demonfatal!

My problem is that I put navigator folder in the sd card with a 675. map but then I can not run ttn7bot.exe, it says : "ttn7bot is not a pocket pc valid application"... is a Hp 1940 win ce 4.20

:confused5::confused5::confused5:

Thnx

[demonfatal]

ahah!
Your device run under > Windows Mobile 2003 Pro
You need use this release:
[Only Registered Users Can See Links] ;)

[hardy32]

Hello Demonfatal,

can you please give me a feedback to what I wrote?

Thx
Hardy

[demonfatal]

Because if you delete the trip in memory the next time the navigator stuck with a memory error message.
With the xcopy you keep always a valid mapsettings.cfg file and the navigator works fine!
Without that you get a memory error on WINCE device 4.2 ;)
Maybe try the version of poulopoulos (no file .mscr) ;)

[firecracker1]

When i click on the "TTN7BOT.EXE" file it says "cannot find 'iexplore' ( or one of its components)

Like i sais im installing it on a Becker 7934 Win CE 4.2. Am i missing something?

Thanks. your a genius in this field.

I get this nearly this same error, i have read the tutorial up and down but since I cant get past step 5 it does not do much good. I have also read all replies here, i found two people who had the same issue but never found their resolution.

My difference is I can get to the screen that has 3 buttons
Terug Help Volgende but when i click volgende it says
"Cannot find 'iexplore' (or one of its components). Make sure the path and filename are correct and that all required libraries are available."

I saw your possible resolution of "Try to run "TomTom Navigator.exe"" but it gave the same thing. Thinking it wanted explorer.exe to be iexplore.exe i made a copy but it still gives the same answer

[Dbouch]

Hi thanks for making running TT7 in wince 4.2, it's great ;)

But i Have a similar problem than above : I'm on WinCE .NET 4.2 (viamichelin X-950T) but when I click on TTN7BOT, he said to me : 'TTN7BOT' is not a valid windows CE application. What can I do to resolve that?

Thanks in advance !

[mimir]

Hello Demaonfatal
I have the same problem as BenB, when i click on ttn7bot.exe i have the message "ttn7bot is not a valid windows ce application", so i have download the C5_dll.zip and add it one by one but no change.

Thank you
GPS : viamichelin x950t

[mimir]

Hello

@Dbouch

You have to use the Poulopoulos version, it's working for me

[Only Registered Users Can See Links]

[gertvangaever]

Hi There.
I've succeeded on installing tomtom on my MyGuide PNA 4200. (bought from 1dayfly.nl a week ago)
But it seems he can't find any sattelites.
I've used 'other NMEA gps', '57600 baud', 'COM6'.
All other settings say 'no gps detected'
With the above setting, it says 'no good signal detected - are you in a building'?
Even after 10 minutes waiting: nothing...

Anyone any idea what I can do?

Tnx

[demonfatal]

Try the tool AUTODETECTGPS on your device for find the good settings ;)

[gertvangaever]

thanks, it found com6, 9600bps...
And he starts looking for satellites, can find some... but still grey (no fix)...
But then... tomtom is stuck...
can't do anything anymore...
I can still open other applications using start button, but the tomtom app doesn't do anything...

any idea??

tnx

[demonfatal]

Tomtom is stuck ?
But if you touch the screen tomtom is stuck again ?

[gertvangaever]

hmmm I already found some 'solution' in the forum thread here
But now I have the message 'unable to start - not enough memory is available...' :-(

[demonfatal]

Have you tried with my tutorial for WINCE 4.2 ?
Just you need a valid "mapsettings.cfg" file in your map folder then that woks fine ;)

[gertvangaever]

it works... :-)

there's a little error in your script though...

xcopy: there's 1 '(' too much!
(in fact I removed them...

tnx!!!

[demonfatal]

haha great news ;)

[temp123]

Nevermind

[magikstar]

hello everyone,I've a AIRIS T920 wince 4.2.
I'va a problem with memory.

[firecracker1]

I get this nearly this same error, i have read the tutorial up and down but since I cant get past step 5 it does not do much good. I have also read all replies here, i found two people who had the same issue but never found their resolution.

My difference is I can get to the screen that has 3 buttons
Terug Help Volgende but when i click volgende it says
"Cannot find 'iexplore' (or one of its components). Make sure the path and filename are correct and that all required libraries are available."

I saw your possible resolution of "Try to run "TomTom Navigator.exe"" but it gave the same thing. Thinking it wanted explorer.exe to be iexplore.exe i made a copy but it still gives the same answer

I am using a WorldNav 3100 device built on the wince 4.2 platform, does this count as a PNA?

[demonfatal]

Yes it's a PNA with Windows CE 4.2 ;)

[firecracker1]

Yes it's a PNA with Windows CE 4.2 ;)

any idea why it is giving me the error
"Cannot find 'iexplore' (or one of its components). Make sure the path and filename are correct and that all required libraries are available."

[demonfatal]

Hmmm I have already saw this error.
Try to find a tomtom 7 version compressed with UPX or try the Poulopoulos version ;)

[firecracker1]

Hmmm I have already saw this error.
Try to find a tomtom 7 version compressed with UPX or try the Poulopoulos version ;)

I just tried the Poulopoulos version, did not work. What do you mean compressed with UPX

I just tried the Poulopoulos version, did not work. What do you mean compressed with UPX

upon further inspection, it seems my ce device does not have an iexplore.exe when i put my explorer.exe as iexplore.exe it gets rid of the error but pulls up the start button instead, do you have a copy of iexplore.exe off your ce device.

[pasroy]

Hello
thanks for this tutorial
but I have a problem
I can only use the 815 maps
when I try 825 map or 830 map I recieveve te message "out of memory"
and tomtom's software stop
Can you help me ?

[pasroy]

Thank for your tutorial
but I have a problem I can only use the 815 maps insted of receving a message "out of memory" on tomtom's software closed
I have try some files to resolve this problem (tomtom...exe and chk file)
but it's always the same problem
I use the tomtom 7.450 9030 because if I use the 7.9.... I recieve this message at the strat of tomtom

so If someone can help me

I use a GPS ACER D100

[anjones12]

Hi
I can not download file 2 - says its been removed.
So can go no further. Anyone know where to get file 2?

[demonfatal]

Hi
I can not download file 2 - says its been removed.
So can go no further. Anyone know where to get file 2?

Sorry my friend link updated ;)

@pasroy
Try the tutorial again very very slowly ;)

@firecracker1
Hello :)
I have not this file iexplore.exe on my device too and I don't get this problem...
Try to find this file, use google ;)

[firecracker1]

Sorry my friend link updated ;)

@pasroy
Try the tutorial again very very slowly ;)

@firecracker1
Hello :)
I have not this file iexplore. on my device too and I don't get this problem...
Try to find this file, use google ;)

didnt find it, but apparently I was reading your tutorial wrong at this point. So now I only get a memory error. How much memory is required to run it.

Also, the only way I am able to get files to run is to rename TTN7BOT.exe to mobilenavigator.exe

And for me they need to be in the \SDMMC\MobileNavigator folder


Edit, I can get it to run if I edit my registry
but it will only run on
\SDMMC\navigator\TTN7BOT.exe

I can not get it to run on

\SDMMC\TT7.WCE.4.2\TT7 Navigator.exe (nothing happens when I try to run this). I edited the TT7 Navigator.mscr correctly.

Is there any harm in getting it to run with:
\SDMMC\navigator\TTN7BOT.exe

[b.breum]

First off. THANK YOU FOR THE GUIDE.
It worked like a charm!!
Now to the question.
the product is mio 269+ gps with 2,4 something GB internal storage.
Im able to run IGO 8 and IGO 8.3 and miomap from the internal storage without problems.
I installed TOMTOM 7 into the internal storage
I installede the map (i copied the folder from the sd car) also
so now the program and map are in the same root folder.
the location is.

storage device\mp3\tomtom\xxx and xxx

IT WILL NOT RUN unless the SD card is inserted with the map.
How?? :mad2:do I make tomtomt understand that I already have the map in the folder right beside it, so it should work just like it does with the SD card.

I just need to figure out how to make tomtom look in that folder instead of the SD card.
Help,, anyone??

[pasroy]

I have try the tutorial (very very very very slowly) and I have always the same problem with maps 825 and 830 .
the problem arrive just approximatly 5 second after having charge the new map and it seems to arrive when the GPS start searching the satellites.

[pasroy]

Do you know if someone had already arrive to use the map 825 or 830 on a acer
D100 with winCE

[demonfatal]

WHat problem do you get ?

[ronb94]

Hi
When I try to run TTN7BOT.EXE in step 4 I get:
"Je apparaat is niet geschikt voor TomTom Navigator"
If I open ttnavigator.bif I have :
DeviceSerialNumber=
DeviceUniqueID=**********
I am using Pioneer AVIC-S2.
I saw in this thread the same problem with the same device and you linked to update the rom with [Only Registered Users Can See Links] ([Only Registered Users Can See Links]).
I did it but I still have the same message.
Thanks

[bustale]

I tried it on my pioneer avic s1 with win ce 4.2 but say"your device is not compatible with tomtom navigator".Why?

[demonfatal]

You need "tomtom navigator.exe" file compressed with UPX ;)

[bustale]

ok i tried it but it doesn't work, there is the same error. why?

[demonfatal]

What UPX Version have you downloaded?

[ronb94]

demonfatal did you said it to me?
What do i need to do with th upx?
Can you explain more please?
Thanks

[bustale]

What UPX Version have you downloaded?
i downloaded this upx303w

[demonfatal]

Search on the forum a "Tomtom Navigator.exe" version already compressed with UPX...;)

[bustale]

i tried a version with a tomtom.exe compressed with UPX but the same error tomtom navigator is not compatible with your device.

[demonfatal]

Try this one:
[Only Registered Users Can See Links] ;)

[bustale]

it say:cannot find mobilenavigator(or one of its components).Make sure the path and filename are correct and tath all the required libraries are aviable.

[bustale]

other advise?

[danix]

Thanks to demonfatal's great tutorial I've managed to install and run tomtom 7 on my Airis t920.

However there are 2 questions I'm having probs with...any help would be great!

1. I can only run TT7 by running wince exporer and running the tt7 executable - is there any way I can run it when the airis boots or when I click Navigation from the airis welcome screen?

2. I have set TT7 GPS to use 'inbuilt gps receiver' but it does not pick up a signal...any ideas?


many thanks
Danix

[dem1980]

"Not enough memory" for me too.
Tomtom 7.450.9030 works but not the 7.910.9185 (i'm in WinCE 4.2).
I have 40Mo of free memory on my device.
Any idea ?
I have tried the F10 version, but it doesn't start, maybe it is for WinCE 5 ?
I have tried the Poulopoulos but 3not enough memory".

[danix]

"Not enough memory" for me too.
Tomtom 7.450.9030 works but not the 7.910.9185 (i'm in WinCE 4.2).
I have 40Mo of free memory on my device.
Any idea ?
I have tried the F10 version, but it doesn't start, maybe it is for WinCE 5 ?
I have tried the Poulopoulos but 3not enough memory".

I had the memory problem - I redid the install and followed the tutorial EXACTLY and the memory error has gone.

I'm running wince 4.2 and TT 7.450.9028

[dem1980]

In fact the version 7.450 has not the memory problem.
It seems that it is only the 7.910 have the memory problem.

[danix]

I have an airis t920.
It runs the nav system by running a file called Infinity.exe in the root of the device.

Is there any way I can create a file called Infinity.exe that then runs tt7.exe?

[nixlaws]

thanks a lot

[slowgrind]

You need "tomtom navigator.exe" file compressed with UPX ;)


as far as I understand, if you compress something with UPX, that something will need
even more memory to unpack its executable in RAM. why would one want to compress tomtom exe with UPX? it only saves disk space, not RAM.
7.910.9185 seems always to give not enough memory message at some point.
also what is the theory behind mapsettings.cfg file? why when you start with predefined
route, why tomtom doesnt give memory message? does this prerecorded route have to be short or long or doesnt matter? RAM is the biggest problem here, we need to free more of it in wince 4.2 somehow. i have managed to run 7.450 version, but struggling
with 7.910

medion mdpna 150 wince ce .net 4.2 build 1088

[Only Registered Users Can See Links]

[akabob]

"Not enough memory" for me too.
Tomtom 7.450.9030 works but not the 7.910.9185 (i'm in WinCE 4.2).
I have 40Mo of free memory on my device.
Any idea ?
I have tried the F10 version, but it doesn't start, maybe it is for WinCE 5 ?
I have tried the Poulopoulos but 3not enough memory".

On my Airis T920 with wince 4.2, I always had "Not enough memory" problem with TT 7.450 ot TT 7.910 until I found one day a post of a guy that was saying the problem was gone for him when the memory card had less than 20 Mb available space.
I cannot explain it but Iit simply worked for me too :)

I use "Huge fake file creator" freeware to create fake files on my SD card and to ensure it always has between 10 en 20Mb available space.

TT 7.910 runs flawlessly for months now ;)

@Danix: you have to use "Sunnysoft Backup Manager v3.3" to create an autoexec file for your Airis T920 that will automatically lauch TT when it starts from scratch.
Simply generate the exe file with this software, then rename it to "autorunce.exe" and put it in the Infinity folder on the SD card.

Hope that helps :biggrin1:

[snapz123]

I couldn't open the "TT7 Navigator" file but managed to open the "TomTom Navigator" file and it works normally. Is there any difference?

Can you help me out?

[demonfatal]

Look the script file (.mscr) you have bad paths inside ;)

[France]

Hallo all
this is the first time I get into this forum, so sorry if maybe I'll ask for something already answered, or not in the correct way
I'm quite new on gps: I'm trying to install TOM TOM 7 on a Myguide 3000 navigator with Wince NEt 4.2 Core.
I followed carefully Demonfatal's tutorial, but when arriving at the last step, after having modified TT7 Navigator.mscr file, TT7 Navigator.exe doesn't start.
I modified addons.txt file so to have it launching clicking the icon on the screen, but nothing.
Even launching TT7 Navigator.exe directly from TT.WCE.4.2 directory on the SD Card, nothing happens.
I used the Central_and_Eastern_Europe map
Is there anything I have to look at to have it working?
I tried the whole installation twice from scratch, but same result
Many thanks

[demonfatal]

Same answer for you "France" here:
[Only Registered Users Can See Links]
Point the script to correct path and all is ok ;)

[France]

Thanks Demonfatal, I checked again the path and it seems to be correct:
my SD is named Storage Card
Directly on Storage Card I have the map folder (Central_end_Eastern_Europe) and the TT.WCE.4.2 one.
Mapsetting folder is inside TT.WCE.4.2.

The TT7 Navigator.mscr script is the following:

-------------------------------------------------------------------------------------------------
Errorlevel ("off")

Delete ("\Storage Card\Central_and_Eastern_Europe\MapSettings.cfg")
sleep 100

XCopy( "\Storage Card\TT7.WCE.4.2\MapSettings\*.*", ("\Storage Card\Central_and_Eastern_Europe\")
sleep 100

RunWait ("\Storage Card\TT7.WCE.4.2\TomTom Navigator.exe")

Exit

--------------------------------------------------------------------------------------------------

my addons.txt is instead:

--------------------------------------------------------------------------------------------------
[modules]
Games = "icons/games.bmp", "", 0
Navigatori = "icons/games.bmp", "", 0
Explorer = "", "\\Windows\\Explorer.exe"

[Navigatori]
TomTom7 = "", "\\Storage Card\\TT7.WCE.4.2\\TT7 Navigator.exe"


[Games]
Solitaire= "", "\\Storage Card\\games\\solitaire\\solitaire.exe"
Flux= "", "\\Storage Card\\games\\flux\\flux.exe"
Asia = "", "\\Storage Card\\games\\asia\\asia.exe"
Arvale = "", "\\Storage Card\\games\\arvale\\arvale.exe"

---------------------------------------------------------------------------------------------------

what is wrong, in your opinion?
Thanks again
France

[lukemarsh]

Hi i have followed your tutorial to install onto my mio c510. When i run ttn7bot.exe it can't find maps. Can you help?

[France]

Hi all, following my latest reply, I went through the process again, re-installing WCE.4.2 directory, creating a new MapConfig.cfg file with a different path and following Demonfatal's tutorial again, but final result was the same: TT7 Navigator.exe doesn't start (or anything happesn when I try to run it).
Is there any explanation?
I provided my .mscr file previously. From it I couldn't see anything wrong.
Thanks for your support
France

[az_registration]

Hi all,

I'm trying to install TT on WinCE 4.2 device and have no success with it.
I follow the Demonfatal's tutorial and when I start TTN7BOT.EXE (maps are already activated) the application terminates after voice setup. If I have several maps activated it fails after choosing a certain map. So, I can't even reach the fixing GPS step. All further attempts to execute TTN7BOT.EXE or Tom Tom Navigator.exe give 'unable to start. not enough memory.' I have tried both the releases 7.450 and 7.910 with the same result.

Is it a typical problem? Is there any solution?

Thank you in advance!

[carpinho]

Por fiiiiiinnnnnnnnnnnn lo hice !!!
First of all sorry by my bad english.
Thanks DemonFatal i gonna remember your name(nick) for a lot of time (becouse of the passwords jeje). You are my hero ....
I have tried about 3 days to install this navigator and i have a lot of problems the mayority have benn mencionated here in the forum. But I have the tips to install (maybe there are mension here) and i hope that you can include this tips in your Tutorial Demon. They are obvius but some people like me can realize later jeje

1.) You have to know the name of your memory card or integrated card. My memory name is MMC_Storage where TT/ is gonna be installed.

2.- Correct the script TT7 Navigator.mscr and replace the word Storage Card by the name of your memory in my case MMC_Storage

3.- Remove one ( (parenthesis) in the code in the part of the xcopy
It have to be like this:

This not work for me
XCopy( "\Storage Card\Program Files\TomTom_7.450\MapSettings\*.*", ("\Storage Card\France_725.1871\")

This work for me
XCopy( "\MMC_Storage\TT7.WCE.4.2\MapSettings\*.*", "\MMC_Storage\Iberia-27\")

4.- In the steps 16 to 24: When you are going to create MapSettings.cfg, you have to be very fast when you run TTN7BOT.EXE becouse inmediately a meesage could appear and ask you to reset your pna (this depend of you pna) and not be able to create the file. Maybe you have to try a lot of times (I try 6 times). You have to try many different letters in many times if it is necesary, choosen the first option always in the step 19. remember be quickly. The file MapSettings.cfg have size about 3k if it is less (2k or 1k) something is wrong. (This cabe seeing in the memory view putted in the pna in the size field)

5.- the step 27 If you put a bad MapSettings.cfg file then when you run TT7 Navigator.exe in the step 34, it is gonna appear the memory problem.

6.- Finally in the installation of tt7 is gonna apear in the upper right side the charging of the routes in smaller phrases, if this no appear something wrong is gonna be happen (yeah problem memory). In the part when tomtom asking you to put your addres press the NO buttoon becouse if you put yes, for an strange reason it give a memory problem again. Then whe the installing is complete and you cna configurate you gps, is able to put your addres in the menu.

I want to share my MapSettings.cfg athaching in the post: this is for the spain and portugal map: Iberia 8.25-2159 version
[Only Registered Users Can See Links]
password: carpinho

now i gonna install the TomTom 7.910 luck for me ;)

I hope this can help you a little. If you have some question no problem to ask me. Thks again DemonFatal

See you.

[hies1971]

Is there also a chance to get this working on a Sony nvu-70??
I Would be very glad if it can. thank's anyway for your support

cheers, Hicham

[carpinho]

Hi hies1971, I think the answer is yes, becouse this device works in windows ce, but i dont know what version. See the specifications SO of your device ans put it here.

Seee you

[hies1971]

Hi hies1971, I think the answer is yes, becouse this device works in windows ce, but i dont know what version. See the specifications SO of your device ans put it here.

Seee you

Hi Carpinho,
thank's for your promp reply. It's windows ce 4.2. I've tried the tutorial but somehow didn't get to manage to work. However for iGO software, according through this forums:, for sony devices you have to use a unlock file, but i think this file doesn't fit fór tomtom. Anyway thanks invance for your input.

cheers,

[az_registration]

Hi Demonfatal,

In addition to the previous message ([Only Registered Users Can See Links]) I want to add that I have tried to use wince 5.0 device to generate MapSettings.cfg. After I got the file, I put it onto wince4.2 device, reactivated maps and run Tom Tom Navigator.exe. The first run didn't give the memory error message, the tom tom window just disappeared (but I'm not sure that the process was terminated). But all the subsequent runs give "unable to start. Not enough memory").

I would be very appreciated if you could help.
Thank you in advance.

[hies1971]

Hi Carpinho,
thank's for your promp reply. It's windows ce 4.2. I've tried the tutorial but somehow didn't get to manage to work. However for iGO software, according through this forums:, for sony devices you have to use a unlock file, but i think this file doesn't fit fór tomtom. Anyway thanks invance for your input.

cheers,
Demonfatal,
any suggestions please??

[sase]

Hi Demonfatal
I appreciate the work in preparing the tutorial
Here's my problem:
I followed your instructions to the letter, and managed to get TT working, but after i start TT it shows my position in Kiev and a "no gps device" below it
I got a Mio C310 and the Eastern Europe 830 2306 map.
BTW i couldn't start TT from the TT7 Navigator.exe file , but it starts from the TomTom navigator.exe file

[demonfatal]

Hi Demonfatal,
In addition to the previous message ([Only Registered Users Can See Links]) I want to add that I have tried to use wince 5.0 device to generate MapSettings.cfg. After I got the file, I put it onto wince4.2 device, reactivated maps and run Tom Tom Navigator.exe. The first run didn't give the memory error message, the tom tom window just disappeared (but I'm not sure that the process was terminated). But all the subsequent runs give "unable to start. Not enough memory").
I would be very appreciated if you could help.
Thank you in advance.
Try to create the "mapsettings.cfg" file with a WINCE 4.2 device. ;)

Demonfatal,
any suggestions please??
What error do you get??? More details please!

............but after i start TT it shows my position in Kiev and a "no gps device" below it
I got a Mio C310 and the Eastern Europe 830 2306 map.
For your gps choose: OTHER GPS NMEA > then use the tool called "autodetectgps" (use google) for find the good settings.
BTW i couldn't start TT from the TT7 Navigator.exe file , but it starts from the TomTom navigator.exe file
Yes, because you have some wrong path in the script "TT7 Navigator.mscr", please check this file again. ;)

[sase]

Thanks for the advice, i got the gps working that way, and the part about having the wrong path in the script "TT7 Navigator.mscr", do i have to change it? does it make any difference? It's working fine as it is

[hies1971]

I have a sony nvu 70, but somehow the navigator file won't startup, during boot. I got just one (window)-screen in were i have to input date/time setting, and then system drops dead (black screen.) The device has a mount-volume map, and on that map you have a " sony" and "navigator" files. I also pasted the navigator file in the sony directory and also no results.

Cheers,

[demonfatal]

@sase
As you want but if you don't use the "TT7 Navigator.exe" file for start tomtom and if you delete the trip in memory and your home location address you'll get again the memory error...;)

@hies1971
Unlock your device and try to install .NET framework 3.5 ;)

[sase]

Aha understood.so i change the third line right?

-RunWait ("\Storage Card\Program Files\TomTom_7.450\TomTom Navigator.exe")
to
-RunWait ("\Storage Card\Program Files\TomTom_7.450\TT7 Navigator.exe")

Is this right?

[demonfatal]

lol no! "RunWait "("\Storage Card\Program Files\TomTom_7.450\TomTom Navigator.exe")" is good!

Where is located the tomtom folder on your sdcard???

[sase]

Oh yeah, i got it now

[hies1971]

@sase
As you want but if you don't use the "TT7 Navigator.exe" file for start tomtom and if you delete the trip in memory and your home location address you'll get again the memory error...;)

@hies1971
Unlock your device and try to install .NET framework 3.5 ;)
Which unlockfiles should I use? there are several different unlockfiles. I've also installed .netframework 3.5, but unfortunate no effect.

Cheers,

[demonfatal]

Really with your device seem very hard!
Try to unlock it with miopocket and test again...maybe...;)

[az_registration]

Try to create the "mapsettings.cfg" file with a WINCE 4.2 device. ;)



Hi Demonfatal,

I have been trying to create mapsettings.cfg within wince4.2 device, but the problem is that TTN7Bot.exe is abnormally terminated after the voice is set up. All the next attempts to run it give not enough memory message. If CurrentMap.dat or navigator.cfg are deleted from 'navigator' folder I can reach voice set up dialog again, but no more than that.. mobilenavigator.exe and TomTom Navigator.exe give not enough memory message.

So after 3 days of :banghead: I tried to use my wince5.0 device :) but again - no success..

[demonfatal]

Ok, create a "mapsettings.cfg" (for your map!) file with a WINCE 4.2 device then go to my tutorial step number 28. ;)

[az_registration]

Hi Demonfatal,

Did you mean create mapsettings.cfg with my wince5.0 device? I cannot reach route calculation step on wince4.2 device..

I tried to use mapsetting.cfg created within wince5.0. Before put in into MapSetting folder, I reactivated maps and then followed your tutorial (from Step 28). But TT7 Navigator.exe terminates after the voice setting up step..

[demonfatal]

You want use tomtom on a WINCE 4.2 device right?
You must create a "mapsettings.cfg" with a WINCE 4.2 device for your map!
You understand? :)

[az_registration]

Yes, wince4.2 is my target :)

But I cannot get this file on wince4.2 device, because TT7NBot.exe (which is used to get mapsettings.cfg by calculation of a route without fixing gps) terminates after the voice setting up step. So I cannot reach step 16 of the tutorial :(

Sorry if I've expressed obscurely :)

[Zongobongo]

Hi same prob as above here. I'm using WinCE 4.2 on Navman icn520 with Western_and_Central_Europe_2GB_815_2096 maps. I can start TT, but after choosing the map it crashes to the desktop. Therefore no mapsettings.cfg can be created... Any idea's?

( I have used tt7_keygen.exe and tt8_keygen.exe both to get a DCT, neither works, all files ased from tutorial: [Only Registered Users Can See Links])

If anyone could post a valid cfg that would be nice too :)

thanks!

[demonfatal]

Yes, wince4.2 is my target :)
But I cannot get this file on wince4.2 device, because TT7NBot.exe (which is used to get mapsettings.cfg by calculation of a route without fixing gps) terminates after the voice setting up step. So I cannot reach step 16 of the tutorial :(
Sorry if I've expressed obscurely :)

If you use my tutorial and the right first tomtom version, you don't need choose a language because this version s already ready for use, you need patch your map only!
Please download again all file from the tutorial and try again slowly...;)
Good luck!

Hi same prob as above here. I'm using WinCE 4.2 on Navman icn520 with Western_and_Central_Europe_2GB_815_2096 maps. I can start TT, but after choosing the map it crashes to the desktop. Therefore no mapsettings.cfg can be created... Any idea's?
( I have used tt7_keygen.exe and tt8_keygen.exe both to get a DCT, neither works, all files ased from tutorial: [Only Registered Users Can See Links])
If anyone could post a valid cfg that would be nice too :)
thanks!

I have exactly the same device as you!
First you need unlock your device!
Then with my tutorial that works fine!
Because I have used the ICN 520 for create this tutorial...;)

[MORT7890]

Sorry does not work.

[demonfatal]

Sorry does not work.

lol what is your problem??????????? :out:

[Zongobongo]

Hi demon, nice to meet a fellow icn 520 user :)

Ehh, I did unlock my icn first, otherwise I wouldn't have been able to run the wrapper (TTN7BOT.EXE). I've really run out of options.

Can you confirm that the maps (815.2096) and the TT software form the tutorial ([Only Registered Users Can See Links] is this 7.45?) are compatible?

Also the choice in the dcf tool seemed like I had to go for option 1: Navcore 8.010 and higher, can you confirm this choice?

Suggestions are very welcome, I am at a loss :/

[demonfatal]

My friend, you can use last maps 8.30 with this version!
Look too: How to use keygen here:
[Only Registered Users Can See Links]
If you can't run the file "TTN7BOT.EXE" try the file "Tomtom Navigator.exe" ;)

[Zongobongo]

great! I am working with TT 7.45, I didn't think that would work with 830 maps. I'm downloading 830.2306 now, I'll let you know how it goes.

Thanks!

[MORT7890]

lol what is your problem??????????? :out:

I cannot seem to unlock my wince 4.2. The icons in the navigator folder are different to what are shown so they will not run so I am stuck at the first post. I do not know the model number of my device but tomtom home 1.5 states it is a S3C2440. If I google X11-15297 (think this is model number) I get Evesham GPS(X11-15297). It would appear that it could be a Wince problem.

[Downunder35m]

Miopocket can unlock almost every CE system....

[Zongobongo]

Arrgh! I'm working with TT7.45 and 815.2096 map on my icn 520, starts up fine, but eventually I get the not enough memory error!

I even got the tt7bot install running with the abovementioned map and got a gps fix, drove around for 15 min, but after a restart, boom!

please help, after 2 days of trying this is getting to me... Thanks!

[Downunder35m]

Have you already checked here ([Only Registered Users Can See Links])?

[Zongobongo]

are you referring to the 7.9 upgrade? Sure, I wanted to have 745 working first though... Seems to have less mem problems than 7.9, or am I misstaken?

thanks

[Downunder35m]

From all what I've been reading it all depends on the right installation and the settings in the Windows system.
The ICN series was very tricky from the beginning - I stopped trying on my 510 after I found out that I could not get it to "speed" - it was always "jumping" on the map.
But that was with the first 7.4 version.
I have not tried it myself ,but some ppl say IGO would be much easier - both for installation and for the user interface. That all depends of course on what you prefer.
If in doubt ,wait for demonfatal ,he knows a great deal of this installation procedure and the tweaking for WinCE4.2.
I assume you already disabled the power saving features in Windows?

[Zongobongo]

yea, I leeft powerscheme as-is, no saving. When runnint the TT&bot with gps fix it was running fine, no lag or anything. I have upgraded the data.chk and tomton navigator.exe file to 7.9 (and redid the map activation) but still within a minute it goes all poof :(

[demonfatal]

What tomtom version do you use??

[Zongobongo]

I'm using the TT version v7.910.9185 from here: [Only Registered Users Can See Links] upgraded from 7.45. Still getting the "out of memory" error.


TT: v7.910.9185
Map: Western_and_Central_Europe_2GB_815_2096
Device: NAvman iCN 520
OS: WinCE 4.2
MapSettings.cfg: generated
TTNavigator.mscr: fixed with correct path and delete copy actions
Note_prj.dll: present

hmm, something curious I forgot to mention since it seems to pick up on the sattelites, it says when displaying current location "no gps device"...

[demonfatal]

Please use my tutorial a new time...slowly...
For create the file called "mapsettings.cfg" for your map...;)

[Eijkr04]

Hi Demonfatal,
I'm new here,
I have a 2-din in dash carsystem (shit stuff fron china)
itruns on win ce 4.2. I used your tutorial to get tommy on my shitsystem (have route66 from 2007 with runs great but can't update). Everything went well untill i was at point 34 of your tutorial. i started tt7.exe and nothing happend. In my cardmap my mapsetings.cfg was deleted but thats all that happend. Do u have a idea??
My mscr script:

Errorlevel ("off")

Delete ("\StorageCard\Western_and_Central_Europe_825_2158\MapSettings.cfg")
sleep 100

XCopy ("\StorageCard\Program Files\TT7.WCE.4.2\MapSettings\*.*", "\StorageCard\Western_and_Central_Europe_825_2158")
sleep 100

RunWait ("\StorageCard\Program Files\TT7.WCE.4.2\TomTom Navigator.exe")

Exit

Thanks in advance,

[demonfatal]

Just delete "\Program Files"...;)

Errorlevel ("off")
Delete ("\StorageCard\Western_and_Central_Europe_825_2158 \MapSettings.cfg")
sleep 100
XCopy ("\StorageCard\Program Files\TT7.WCE.4.2\MapSettings\*.*", "\StorageCard\Western_and_Central_Europe_825_2158" )
sleep 100
RunWait ("\StorageCard\Program Files\TT7.WCE.4.2\TomTom Navigator.exe")
Exit

Note: You can use the last map Western_and_Central_Europe_2GB_830_2307 too! :)
(But if this use this one you must use my tutorial a new time for create a new "mapsettings.cfg" file for the map...)

[MORT7890]

Miopocket can unlock almost every CE system....

Sorry not my Wince system. Further help required please.

[Downunder35m]

If your system can't be unlocked it is very hard to get other software installed properly.
Sometimes it works if you install it into the games folder - if there are games on it and you are allowed to add some more.
Only other option I know is to use the same folder your old Navi spftware was using for the new software and rename the the file that starts it to exactly the same name that was used to start the old software.

[MORT7890]

If your system can't be unlocked it is very hard to get other software installed properly.
Sometimes it works if you install it into the games folder - if there are games on it and you are allowed to add some more.
Only other option I know is to use the same folder your old Navi spftware was using for the new software and rename the the file that starts it to exactly the same name that was used to start the old software.


Thanks Downunder35, seem to have tried all maps and changed the startup details all to no avail. Seems I have a system that cannot be updated at all. Once again many thanks for your suggestion.

[arthur2501]

Dear DemonFatal and TT fans,

Does anybody knows the Cspeech*.* can be delete or not ?

Thanks !!

[demonfatal]

Yes can delete these files and replace it with dummy files. ;)

[Zongobongo]

Just to report back, I've got TT7.45 working on my Navman iCN 520 with Western and central European maps v 815.2096. Funny enough placing the Tomtom files in the TomTom directory of the SD root (instead of leaving them in TTce42 or something map) seemed to have done the trick...?

I also have had to replace the mapsettings.cfg with a backup one (after getting it working) when I had "tweaked" the 520 with some additional apps (pdfreader etc).

Just so you know, it can be done, but it's a fickle beast. As Demonfatal has described more than once, a good MapSettings.cfg is of paramount importance!

Thanks guys for all the help, and maybe... just very maybe I can be seduced in upgrading to 7.9 and the v830 maps later on... Oh well ;-)

edit:
Well, I decided to go ahead with 7.91 while I got the 7.45 working. I downloaded the upgrade from here ([Only Registered Users Can See Links]). Then got the 830.2306 maps on my device, ran the TT7bot form the tutorial to get a mapsettings.cfg, and then started form the 7.91 version. All good!

Some tips for fellow navman icn 520 users:
- check memory settings in configuraion/system/memory and make sure you allocate enough ram to get the progs running (doh!).
- once you have a good mapsettings.cfg, do make a backup, so that you can put it back with a filemanager (installed on the device) on the road
- TTNavigator.mscr: fixed with correct path and delete copy actions (not using this script, running Tomtom navigator.exe directly, but make sure to leave a route in place)
- Install dir: \Storage Card\TomTom
- GPS device setting: NMEA or other GPS device, 4800 baud, serial connection

current config:
TT: v7.910.9185
Map: Western_and_Central_Europe_2GB_830_2306
Device: NAvman iCN 520
OS: WinCE 4.2

good luck!

[ciccio87]

I menaged to extract map files..but following the tutorial I remain locked to step 15
"Ok, run the program "TTN7BOT.EXE" again in the "navigator" directory and configure it...but DO NOT FIX SATELLITE!"
I've saved Navigator and map directory on main root of SDcard. When I run ttn7bot.exe my mio c510 show me two choices:
'Italia' and 'Italia'. For any choice, my mio c510 show me the message:
"dit is helaas niet de juiste activeringscode voor het product 'Itlalia' " and from there I can not continue.
I think intends that this is not the correct activation code for the product Itlalia...someone can help me?

[Downunder35m]

I would say your error message means that you have not used the right meta code for the map activation or that the map is not properly activated.
Try it again with Easy Activator ([Only Registered Users Can See Links]) and make sure you have the right meta code in the file "meta.txt" .
The code is listed next to the download link of the map and be copied into the meta.txt by using a text editor.

[Zongobongo]

@ ciccio87:
being Dutch myself I can confirm that "dit is helaas niet de juiste activeringscode voor het product 'Itlalia" means that its not the rigth activation code for the product.

When activating your map use the correct navcore version. When you are using the bot it should be activated for v7.45

[August12]

for first thank you demonfatal for making all this nice Turtorials and possibilitys for us to use tom tom on Wince 4.2

i have one question about the tt7 Navigator.mscr script

i havent really undestand for what i have to use it if evrything is installed on PNA if your script stays its not possible to save poi settings and some other things like Routes he always want to start with the route we created when we installing

i edited the tt7 Navigator.mscr
from previous version

Errorlevel ("off")

Delete ("\SD Card\DEATCHaEE_830.2306\MapSettings.cfg")
sleep 100

XCopy( "\SD Card\TT7.WCE.4.2\MapSettings\*.*", ("\SD Card\DEATCHaEE_830.2306\")
sleep 100

RunWait ("\SD Card\TT7.WCE.4.2\TomTom Navigator.exe")

Exit

Errorlevel ("off")

RunWait ("\SD Card\TT7.WCE.4.2\TomTom Navigator.exe")

Exit


to this one and now my settings with all pois are working fine i am using tomtom 7.45 with cards 830.2306 on a Typhon 3500 go

next thing is that my card screen on navigating is very slow the voice comes in right time but often the map shows me too late i switched from 3d to 2d maybe you have any idea by the way for that little problem too

but i asume it depends on the sd cards that i use or that my Typhon 3500 go is to slow for the new cards on 8.30 series

with 6 and 7 version cards evrything works pretty fine

Greets from August

[ciccio87]

I would say your error message means that you have not used the right meta code for the map activation or that the map is not properly activated.
Try it again with Easy Activator ([Only Registered Users Can See Links]) and make sure you have the right meta code in the file "meta.txt" .
The code is listed next to the download link of the map and be copied into the meta.txt by using a text editor.

same error :angry:
I have the right meta code in the file "meta.txt" , same meta code of Italia_830_2306 in the first post of 8.30 maps!
I've deleted all flies and copied Navigator and map directory in main root of SDcard..followed the tutorial first and Easy Activator then...but this error returns! :18:
any idea? and if the system registry?

[MORT7890]

OK followed all instructions as best I could and I have a problem. Started my satnav, it found tom tom 7 and ran OK, loaded all the settings, time, voice etc then it came up with No Maps Found and the time in the top right hand corner is covering 24 hours in 3 seconds. Major help would really be appreciated in simplistic terms please. Many thanks in advance.

[prof_prevaricador]

I just notice that TomTom always assumes the original route from the first installation and it doesn't saves the Favorites and Residence coordinates... You should fix it in your tutorial.
After the first run I changed the TT7 Navigator.mscr to:
________________________________
Errorlevel ("off")

RunWait ("\SDMMC\TT7.910\TomTom Navigator.exe")

Exit
__________________________________

it started saving my last destination and favorites....

[Downunder35m]

If you always get "no map found" even after correct activation ,it is possible that you hav to copy the map folder into "My Documents" - create this folder if not existing.

[MORT7890]

If you always get "no map found" even after correct activation ,it is possible that you hav to copy the map folder into "My Documents" - create this folder if not existing.
Thanks for the reply Downunder35m
My system is an OEM version and this is the first time I have tried to put other maps on it, all Western Europe.

The folder my documents does exist it has also inside a folder called TomTom but that is empty, do I put it direct into My Documents or into the TomTom folder.

Everything on mine seems to run from the SD card so is there a way of making it point to the maps on the card, or is there some script that can be put into My Documents to make it go back to the maps on the SD card.

Jack

Tried putting the maps into My Documents and it reports not enough space to complete.

[Downunder35m]

I can't help you with the "not enough space" message - free up some space or delete unused files - better : buy a bigger SD card :)
Check demonfatals tutorials - there is a lot of info in them on how to get working ,every device is deifferent and sometimes it is tricky to find the right folder that is accepted.
Try the Tomtom folder as well.

[MORT7890]

I can't help you with the "not enough space" message - free up some space or delete unused files - better : buy a bigger SD card :)
Check demonfatals tutorials - there is a lot of info in them on how to get working ,every device is deifferent and sometimes it is tricky to find the right folder that is accepted.
Try the Tomtom folder as well.

The not enough space is coming from my unit (My Documents) not my SD card as that is where you told me to copy the map folder. I think it is something to do with the script telling TomTom where to go, either in the shell or in the TT7 Navigator.mscr.

[maxim]

hi i'm a icn520 user i unlocked icn520 already, but i bought a new 2Gb sd card.i follow tutorial.pdf download file N 1 and Extract folder in my sccard , and i copy the map folder Australia_815_2086 in the sdcard root too. i put my card in device and run ttn7bot.exe . display Language is not english i guss maybe German ,at last system give me a massage cannot find iexploer etc.... i don't know what i'm gong to do?

[demonfatal]

Have you patched your map with the keygen?

[MORT7890]

Hi Demonfatal.
Once again I have formatted my sd card and followed you tutorial using maps United_Kingdom_and_Republic_of_Ireland_830_2305 I created the United_Kingdom_and_Republic_of_Ireland-35.meta.dct then went to run (number 15 on the Tutorial) TTN7BOT.exe and got Geen Kaarten Gevonden! instead of the maps. What have I done wrong please.
Regards
Jack
I think I posted this elsewhere so sorry if I have duplicated this.

The shell on my card is \SDMMC\TT7.WCE.4.2\TT7 Navigator.exe
The script in MSCR is Errorlevel ("off")

Delete ("\SDMMC\United_Kingdom_and_Republic_of_Ireland_830_2305\MapSettings.cfg")
sleep 100

XCopy( "\SDMMC\TT7.WCE.4.2\MapSettings\*.*", ("\Storage Card\United_Kingdom_and_Republic_of_Ireland_830_2305\")
sleep 100

RunWait ("\SDMMC\TT7.WCE.4.2\TomTom Navigator.exe")

Exit

[maxim]

yes, i pathed map and got the *.dct file ,but i cann't understand navigator's language just like " Welkom! Je kunt gratis een kaart........" are these German? i copy the dct file into the map folder and run ttn7bot.exe i click a button "Volgende" and last screen display 1 message "cannot find iexplore (or one of its components). Make sure the path and filename are correct and that all the required libraris are available."

[Downunder35m]

That would be Dutch...
To change the Tomtom language klick on the sign that looks like a tool and use the arrows to scroll through the menu till you see some flags. Klick on the flags and select your language.

[lencuff]

Trying to install this on an unlocked MIO268. When I try to run the TTN7BOT I get this message -- Cannot find TTN7BOT (or one of its components) etc etc.
I copied everything from the download to my sd card in the navigator folder. Any ideas please?

[Downunder35m]

Seems you have some dll's missing on your device.

[lencuff]

Anyone have a clue which dlls I'm mssing?

[maxim]

how can i do this?


You need modify the registry of PNA :
HKEY_LOCAL_MACHINE\Explorer\Shell Folders\My Documents
to
HKEY_LOCAL_MACHINE\Explorer\Shell Folders\Storage Card

or install map in "My Documents"

[Downunder35m]

You a registry editor ,like "regedit" for XP and Vista

[maxim]

Ye, i got it in unlock folder :thumbsup:

i wannt change the language when i click the left top flag , Not enough memory is available ,can i fix it?

[demonfatal]

Try my tutorial a new time but slowly! :p

[maxim]

em~~~ i downloaded file number 1 and Extract this file into my sdcard, downloaded the map australia 835 and copy in my sdcard, in my sdcard path like this
/sdcard/Austraila/*.*(files)
/sdcard/navigator/*.*(files)

then i run ttn7bot.exe in folder navigator. it's not display english, still cann't find maps

ps: i modify registry of PNA already ,just
HKEY_LOCAL_MACHINE\Explorer\Shell Folders\My Documents
to
HKEY_LOCAL_MACHINE\Explorer\Shell Folders\Storage Card

[Downunder35m]

The Australia 835 map is ot compatible with CE or WM devices - check the chart in the map section.
You can only use the 830.2290 till a new 835 PDA compatible map for Austalia is available.

[maxim]

em , i got another map Australia_815_2086 i have tried and i got same problem!

[Thermeus]

Hi

I ask some help to you after a long and a long time in trying to start tomtom for my win ce 4.2, i will become crazy ... ^^

First, i have to say that I use a viamichelin x950t with leyto mod for put it as a tomtom gps.

[Only Registered Users Can See Links]

So I folloow step by step his tutorial, and my viamichelin is now modded.

But I don't find tomtom 6.2, so leyto advice me to use your tomtom 7 for wince 4.2

I follow step by step your tutorial, and in the step 4, when you say to launch ttn7bot.exe, I have this message :
TTN7BOT is not a valid Windows CE application.

Before to launch this application, I put the ddls like leyto says :

"copiez \Windows\Bt*.dll dans \Storage Card\InstallSD\IncludeCard\Windows
copiez \Windows\ttn*.dll dans \Storage Card\InstallSD\IncludeCard\Windows
copiez \Windows\TomTom*.dll dans \Storage Card\InstallSD\IncludeCard\Windows

COUPEZ \Program Files\Navigator\*.* dans \Storage Card \Program Files\Navigator très important pour que le bouton Tomtom fonctionne." (here i put the demonfatal navigator with ttn7bot.exe

"
Copiez le rep "tomtom" que vous trouverez à la racine de votre gps dans le répertoire "my documents" présent à la racine de votre carte SD (\Storage Card\my documents\)"


I put the card of france 825 2159 in my documents.


Someone can help me ?

[Downunder35m]

em , i got another map Australia_815_2086 i have tried and i got same problem!
Why have you not tried the 830.2290 ?
The 815 is outdated.
Maybe you have to put the mapfolder into the root of your device - on some devices it is not so easy to find the right folder for themaps.
Sometimes it is reported to work if the map folder is in the folder for the navigator.

[demonfatal]

@Thermeus
Hi, just because you need a special tomtom 7 version with your viamichelin x920!
Use this one: [Only Registered Users Can See Links]
Password: demonfatal
Next use my tutorial with this version and you get tomtom working on your device! ;)

[Thermeus]

Thxs demonfatal for the file, but it doesn't work ...


I directly go to the step 25 of your tutorial (before I have modified the map for my tomtom).

I put mapsettings.cfg in the directory map.

Then I follow the tutorial.

I put the directory mapsettings in the tt7.wce.4.2 directory.

But can I put too the data.chk and tt7450.exe (which I find in your last package vm950) in this directory ?

When I launch tomtom, is it with the tt7navigator.exe file or with tt7450.exe file ?

I try all then I always have the message "not enought memory"

I modified the tt7 navigator.mscr, I replace tomtom navigator.exe in the last line, runwait, by tt7450.exe then the gps is blocking.


What I do wrong ?

[maxim]

some people said icn520 cann't use the 2G sdcard, is that ture?

[demonfatal]

You can use on the icn 520 all sdcard 1GB, 2GB, 4GB NON-SDHC!

@Thermeus
Have you created the file mapsettings.cfg for your actual map?

[maxim]

i will become crazy ..... i run ttn7bot.exe still cann't find the map.......

[JD01JD]

For some reason this won't work on my GPS. Tomtom will run the first time without the patched maps but when i patch the maps my GPS give me this error:

Unable to start.
Not enough memory is available

Can someone please tell me what i'm doing wrong?

[allupnya]

This is what I get before it stops. Or I get not enough memory:9898::banghead:

I tryed to upload video to go with this post but I guess I don't know what I am doing.

[Only Registered Users Can See Links]

[Only Registered Users Can See Links]

:scared:

[demonfatal]

I think guyS you have a problem for create the "mapsettings.cfg" file!
This file is created??
Do you use the script for start tomtom???

[JD01JD]

I can't even get up to that step, when I reach step 15 and Tomtom won't open, it just gives me the memory error so i can't prepare the route.

I am using the navigation file you provided and the map: New Zealand_v7.25.1885

What keygen should i use for that map or should I use a different map??

[demonfatal]

You can use the last map 8.35 but you must create the "mapsettings.cfg" file!
Try again slowly with the new map and the tutorial from the biginning...;)

[JD01JD]

The map I need (New_Zealand_835_2419) from your 8.35 maps thread say they wont work with WINCE. Is that correct??

[demonfatal]

Yes sorry you are correct, use the 8.30 version instead...;)

[allupnya]

I got it to work but you have to hook to a computer to start it every time?
And I have to run TomTom Navigator.exe . TT7 Navigator.exe dose not work.

Also it can't find gps it says no gps device.:eek6:

[allupnya]

I got the gps signal to work from instructions on different Thread.

But I still don't know If you have to start the gps from the computer every time or am I not doing something right.:scared:

[pj_uk]

TUTORIAL updated link :

[Only Registered Users Can See Links]
Password : demonfatal


Hi Demon
can u pls tell me why i can not see my tomtom on my window mobile screen befor it was ok but now i have to go to program and start my tomtom i just wanto see it on my screen to click on the tt and start it easly pls advice (many thanks )

(XDA IIS ) If i have to make a shortcut on desktop please explain for me i tried but don't know how !!:nonod:

[Zongobongo]

Well, the new maps (835) have been released, and I eagerly installed them on my Navman icn 520. I can report that I got 835.2420 Western and Central Europe 2GB maps working, yay!
How you ask? well, a quick reference:
If you have the 7.91 core working, all you have to do is generate 2 dct files, 1 for the 7.45 core and 1 for the 7.91 core. If you're working with 7.45, all you need it the 7.45 core dct. I'm assuming you're running the 7.91 core.

1- So make the dct's with your favorite tool, mine is "Easyusetools". (<--option 1, then 1, and for 745 option 2, then 1) (rename the dct's after you create one so you can see which core it's for and copy to the map directory)
2- make the 7.45 core dct the current dct (the filename should be <mapname>.meta.dct, ie "Western_and_Central_Europe_2GB-69.meta.dct")
3- run the tt7bot, go to "prepare route" and make a short route and exit TomTom
4- check for a file called Mapsettings.cfg in the map dir and create a backup copy in the map dir (eg Mapsettings.bak) (If you haven't got a mapsettings file, there's something wrong with the install)
5- make the 7.91core dct the current dct and run "TomTom Navigator.exe"
6- congratulations, you're done!

To make a backup of your Mapsettings.cfg and put it back if need be I have created a (Mort)script to facilitate that. Saves you a bit of time when on the road and the installation stops working 'cause of a missing route in Mapsettings.cfg.

Also I added a speedcams delete, for it's illegal in Germany and Switzerland to have these on your PNA. However I "cleverly" renamed them all with inconspicuous names and put a backup in the "\Storage card\My Docs" folder, and created a different copy script to copy those if I have to delete them (It makes more sense when you look at the script...). Obviously you need to edit the directory names in the script to match your own.

I created a shortcut in the start menu (which is located on "\My Flash Disk\Unlock\Programs" in my install) to the script which I placed in the "\Storage card\TomTom" directory.

Here's the script:

Choice( "Zongo's menu","Select an option","Backup Mapsettings","Restore Mapsettings","Delete Speedcams","Restore Speedcams" )

Case( 1 )
Ans = Question( "Save Mapsettings backup? ROUTE MUST BE IN PLACE", "Save mapsettings", "YesNo" )
If ( Ans eq YES )
Copy( "\Storage Card\WCE_2GB_835_2420\Mapsettings.cfg", "\Storage Card\WCE_2GB_835_2420\Mapsettings.bak", TRUE )
Message( "Mapsettings backed up", "Ready!" )
Else
Message( "Mapsettings not backed up.", "Info" )
EndIf
Exit

Case( 2 )
Ans = Question( "Restore Mapsettings?", "Restore mapsettings", "YesNo" )
If ( Ans eq YES )
Copy( "\Storage Card\WCE_2GB_835_2420\Mapsettings.bak", "\Storage Card\WCE_2GB_835_2420\Mapsettings.cfg", TRUE )
Message( "Mapsettings restored", "Ready!" )
Else
Message( "Mapsettings not restored.", "Info" )
EndIf
Exit

Case( 3 )
Ans = Question( "Delete cams?", "Delete", "YesNo" )
If ( Ans eq YES )
Delete( "\Storage Card\WCE_2GB_835_2420\*.bmp" )
Delete( "\Storage Card\WCE_2GB_835_2420\*ov2*" )
Message( "Cams deleted", "Ready!" )
Else
Message( "Cams not deleted.", "Info" )
EndIf
Exit

Case( 4 )
Ans = Question( "Restore cams?", "Restore", "YesNo" )
If ( Ans eq YES )
RunWait("\My Flash Disk\Unlock\Tools\~bckp.mscr"
Message( "Cams restored", "Ready!" )
Else
Message( "Cams not restored.", "Info" )
EndIf
Exit

Case( 0 )
Exit
EndChoice
Exit



enjoy!


Well, I decided to go ahead with 7.91 while I got the 7.45 working. I downloaded the upgrade from here ([Only Registered Users Can See Links]). Then got the 830.2306 maps on my device, ran the TT7bot form the tutorial to get a mapsettings.cfg, and then started form the 7.91 version. All good!

Some tips for fellow navman icn 520 users:
- check memory settings in configuraion/system/memory and make sure you allocate enough ram to get the progs running (doh!).
- once you have a good mapsettings.cfg, (with a route in place) do make a backup, so that you can put it back with a filemanager (installed on the device) on the road
- Install in dir: \Storage Card\TomTom
- GPS device setting: NMEA or other GPS device, 4800 baud, serial connection

current config:
TT: v7.910.9185
Map: Western_and_Central_Europe_2GB_830_2306
Device: Navman iCN 520
OS: WinCE 4.2

[liguanen]

hei...sorry, but I have tryed many times to DL but never anything inside the files???????
do you have an good answer?????

KR

liguanen

[Rocketray]

Hi I have a 5" pna OEM= YF Atlas4 V3.6. E50.6.1. made by Y F International LTD. it has sirf4,128Mb rom and 64Mb ram a 500mhz cpu running wince6.0. I have managed to install latest tomtom with uk 835 maps using your great tutorial. However I find that it runs very slowly the position lags behind, the maps move slowly and menus change slowly gps is set to com1 other nem device baud rate 4800 bps.t seems like the processors clock speed is halfed.

I have the same software and map set up on a navigo V3 3.5"sifr3, with wince 5.0 372mhz cpu and 64mb ram. without the script file / map cfg etc and it runs perfectly . any ideas what could be causing this lag? thanks.


Update: I have tried many tweeks to remove the lag including moving the status bar to vertical. I thought tis may take some load off the graphic processing (leves a 75mmX75mm map instead of a 100mmX70mm)this seemed to make a slight difference. not many of the other tweeks made any difference however in desperation I reset TomTom via its menu settings and all seems a lot faster. I am not sure if it will last though as I have not done a power off yet only put device in sleep mode. Wll update again when I have used it a lot more.

I would like to take the time to say a big thank youto Deamonfatal for his brilliant almost foolproof Tutorial. THANK YOU!!!


A few more days driving with tomtom and?

I am unable to find just what is causing the slow response of the unit. it is not a permanent fault. Sometimes I will power on and all is as it should be with the pointer updating every second or so and the menus vchange as normal. However other times I get a very slow response from the unit with the pointer updating at 3 to 4 seccond intervals and the menus just as slow. other programs work Ok ie igo-8 and Igo-Amigo. I have tried diferent sd cards from 1GB to a 4GB sdhc. I have tried a direct launch of tomtom ie shell.ini and also from a menu using a version of system info.with the same results. If it starts at a fast speed it will remain at that speed. However if it starts at a slow speed it will remain at that slow speed..

I hope that someone can point me in the right direction to fix this small glitch.

Update: After lots of different settings and cofigurations I have finaly solved the problem. The trick was to follow the tutorial and create a working TomTom folder on the sdmmc card then to move that folder from the storage card (SDMMC) to the device memory (residentflash) then it is just a matter of altering the various paths in the script file to suit. The map dir stays on the storage card. Pointing the launch icon to the tt7navigator.exe file and that was me done. Others may have to use a "shell.ini" to launch the exe file. Hope this is of some help to someone.

[pallino0]

How I Can create or found a valid mapsetting for North America Map(version 835.2421) for bypass the "Not enough memory"? I use Mio 268+ unlocked

[Downunder35m]

If you follow the tutorial step by step you will have a working mapsettings.cfg - it is all explained in there.

[downunder]

Very useful tutorial. I was getting this "Not enough memory" issue earlier, and had wasted a lot of time trying different sort of solution until I found this thread. I must say, it is a fantastic piece of tutorial, with clear and precise steps listed, and I finally get my low cost Chinese made GPS working.
One thing I notice though is if I change to another map, other than the one I used through the set-up, it will screw up the already functioning TT7. I guess this has to do with the mapsettings.cfg created earlier, or may be not????
Another thing I found is if I want to keep my home address remembered or managing the POI, I have to do it before step 24. So I won't lose the settings every time I quit the program.

[tankalf]

Hi Everybody

I followed Demonfatal guide, but I continue to have a problem.

When I finally start TOMTOM with Maps unlocked, it happear a message: UNABLE TO START. Not enough memory available.

My system is a chinese PNA, 7", WinCE 4.2, 400Mhz processors, 64MB RAM.

What can I do?

I really don't know....

[reageer@zonnet.nl]

Ok guys I have finished my tutorial.

If you have problem for install tomtom 7 on WINCE 4.2 device look that :
[Only Registered Users Can See Links]
Password : demonfatal

Enjoy...;)

PS : Thanks to "manjiman" for english corrections.:cool:

Thanks Demonfatal ! Je bent goed bezig !