GARMIN Mobile XT for pna

[garry]

Has anyone managed to get mobile xt working on a pna

Im looking for a simple gps system for my farther hes finding miomap too fiddly, hes used to the StreetPilot i2 which is a doddle to operate.

[GPSnovice]

Has anyone managed to get mobile xt working on a pna

Im looking for a simple gps system for my farther hes finding miomap too fiddly, hes used to the StreetPilot i2 which is a doddle to operate.

I am also trying to run garmin-maps on a PNA (MioC520) because of the TOPO-Maps, but with no success. I think, the mobile XT wont work on an Windows CE, only on Windows Mobile (some PDAs). Or is somebode, who did manage it? :confused:

[poulopoulos]

:DI am also trying to run garmin-maps on a PNA (MioC520) because of the TOPO-Maps, but with no success. I think, the mobile XT wont work on an Windows CE, only on Windows Mobile (some PDAs). Or is somebode, who did manage it? :confused:

nhj

[GPSnovice]

:D
nhj
Can you help us, or are you only laughing about our Problems? Do you got wirking mobile xt on an PNA (like MIO C520)? :confused:

[wayne4616]

Take look at this.

[Only Registered Users Can See Links]
[Only Registered Users Can See Links]

[GPSnovice]

Take look at this.

[Only Registered Users Can See Links]
[Only Registered Users Can See Links]

Thank you very much. This seems to be the way, how to get it working... My only problem is, that i dont understand hungarian language.... :eek:

[miopets]

All of us PNA/PND owners should contact GARMIN technical supports via e-mail or 1-800's (find it on the GARMIN website) and request to make the Mobile XT be compatible with WinCE 4.2 and WinCE 5.0 on the next upgrade version.

I contacted them recently and they said they would pass it to their engineering department. The funny thing is that they said there was not many people have contacted them for the WinCE requests, may be only one every month.

So PNA/PND owners, please contact them. If they received more requests, sooner or later they will listen to the customer demands.

[stacke]

I sent one email asking for a version that works in WinCE 4.2. My gps is a Ndrive G200 and i would like to put a Garmin system in there.

Thanks!

[miopets]

jlapex (Floor 42) from another forum below almost successful to run Garmin mobile XT on WinCE device. He just needs one more correct coredll.dll to make it works. Can't wait to try Garmin XT on my Mio c310x.

[Only Registered Users Can See Links]

[stacke]

I saw that Garmin iQue or Streetpilot operate under WinCE... Have anybody installed the unit software of this models?

[gps_addicted]

Apparently, GMXT have been sucessfully ported to the WinCE platform. Unfortunately the person that did it decided not to release it. You can follow the story on:

[Only Registered Users Can See Links]

At least now, we know it is possible to run GMXT on WinCE.

[dealpapa]

Anybody wants to share GARMIN Mobile XT for pna here? :D

[Al Asmi]

Hi All,

this is what you looking for.

Garmin XT on PNA devices
It won

[Al Asmi]

Hi All,

this is what you looking for.

Garmin XT on PNA devices
It won

Hi All,

this is what you looking for.


[Only Registered Users Can See Links]

[jayzoli]

Can anyone guide me... I have try all means but my Garmin still won't show my Card ID... Can anyone help me!!!

[Lion]

Can anyone guide me... I have try all means but my Garmin still won't show my Card ID... Can anyone help me!!!


I remember that long ago when I installed Garmin on a Laptop(Windows XP) I saw this warning:

NOTE: If you managed to start this software in Trial Mode, you won't see any "Device ID"
in your Settings -> About page.
You will find a kind of "Software Unit ID" instead and you CANNOT GENERATE an
unlock code for it!!!
If this is your case, close down GMPC, then go to
C:\Documents and Settings\<USERNAME>\Application Data\Garmin\GarminMobilePC
and delete its content. Then proceed from Step 2. (reinstalling)

I don't know how to correct it on your device, but maybe you can start allover on a fresh
formatted SD card....

I am running Garmin just fine on a Mio C720 using software from this link:

[Only Registered Users Can See Links]


Hope this will help you ....

[stvaly]

I sent one email asking for a version that works in WinCE 4.2. My gps is a Ndrive G200 and i would like to put a Garmin system in there.

Thanks!
Do you still have the device?
If you have, please can you help me by making a copy of the flash using the AutoRun_armv4.exe utility (link underneath) and send it on email or post it somewhere.
[Only Registered Users Can See Links]
The procedure is like this:
You have to copy the file on the sd card using a computer with the exact name and exact location as the navigation executable after you have saved the original navigation executable on computer for restore. Then just start the gps and instead of starting the navigation exe the unit will run the utility and will make a backup of the flach memory on sd in a .bin file that will have the size of the flash (32MB) this file is very usefull if you ever mess up your unit. The sd card needs to have space for the 32MB file.
After this you just put back the original exe of the nav software using a computer.

I can help with installing IGo8 on this unit with updated maps.
Thank you very much in advance..

[ropac]

Have a look at this thread. Maybe it will help you guys as well?

[Only Registered Users Can See Links]